1
|
[ 0.000000] Booting Linux on physical CPU 0x500
|
2
|
[ 0.000000] Linux version 4.19.67-gnu-2-veyron (builduser@andi) (gcc version 8.3.0 (GCC)) #2 SMP Mon Oct 14 16:07:28 CEST 2019
|
3
|
[ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
|
4
|
[ 0.000000] CPU: div instructions available: patching division code
|
5
|
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
|
6
|
[ 0.000000] OF: fdt: Machine model: Google Speedy
|
7
|
[ 0.000000] Memory policy: Data cache writealloc
|
8
|
[ 0.000000] cma: Reserved 16 MiB at 0xfd000000
|
9
|
[ 0.000000] On node 0 totalpages: 1044224
|
10
|
[ 0.000000] Normal zone: 2304 pages used for memmap
|
11
|
[ 0.000000] Normal zone: 0 pages reserved
|
12
|
[ 0.000000] Normal zone: 262144 pages, LIFO batch:63
|
13
|
[ 0.000000] HighMem zone: 782080 pages, LIFO batch:63
|
14
|
[ 0.000000] random: get_random_bytes called from start_kernel+0x88/0x4e8 with crng_init=0
|
15
|
[ 0.000000] percpu: Embedded 18 pages/cpu s42508 r8192 d23028 u73728
|
16
|
[ 0.000000] pcpu-alloc: s42508 r8192 d23028 u73728 alloc=18*4096
|
17
|
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
|
18
|
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1041920
|
19
|
[ 0.000000] Kernel command line: cros_secure console=tty0 init=/sbin/init root=PARTUUID=e0c9b70e-04be-2f48-bfa4-13fe5a2969c4/PARTNROFF=1 rootwait rw noinitrd
|
20
|
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
|
21
|
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
|
22
|
[ 0.000000] allocated 4180992 bytes of page_ext
|
23
|
[ 0.000000] Memory: 4087708K/4176896K available (9216K kernel code, 710K rwdata, 2204K rodata, 1024K init, 276K bss, 72804K reserved, 16384K cma-reserved, 3096576K highmem)
|
24
|
[ 0.000000] Virtual kernel memory layout:
|
25
|
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
|
26
|
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
|
27
|
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
|
28
|
lowmem : 0xb0000000 - 0xf0000000 (1024 MB)
|
29
|
pkmap : 0xafe00000 - 0xb0000000 ( 2 MB)
|
30
|
modules : 0xaf000000 - 0xafe00000 ( 14 MB)
|
31
|
.text : 0x(ptrval) - 0x(ptrval) (10208 kB)
|
32
|
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
|
33
|
.data : 0x(ptrval) - 0x(ptrval) ( 711 kB)
|
34
|
.bss : 0x(ptrval) - 0x(ptrval) ( 277 kB)
|
35
|
[ 0.000000] ftrace: allocating 32585 entries in 96 pages
|
36
|
[ 0.000000] rcu: Hierarchical RCU implementation.
|
37
|
[ 0.000000] rcu: RCU event tracing is enabled.
|
38
|
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
|
39
|
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
|
40
|
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
|
41
|
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
|
42
|
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
|
43
|
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
|
44
|
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
|
45
|
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
|
46
|
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
|
47
|
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
|
48
|
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
|
49
|
[ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
|
50
|
[ 0.000007] Switching to timer-based delay loop, resolution 41ns
|
51
|
[ 0.000690] Console: colour dummy device 80x30
|
52
|
[ 0.000733] console [tty0] enabled
|
53
|
[ 0.000753] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
|
54
|
[ 0.000758] pid_max: default: 32768 minimum: 301
|
55
|
[ 0.000860] Security Framework initialized
|
56
|
[ 0.000893] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
|
57
|
[ 0.000898] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
|
58
|
[ 0.001301] CPU: Testing write buffer coherency: ok
|
59
|
[ 0.001317] CPU0: Spectre v2: using BPIALL workaround
|
60
|
[ 0.001458] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
|
61
|
[ 0.001788] Setting up static identity map for 0x100000 - 0x100060
|
62
|
[ 0.001839] rcu: Hierarchical SRCU implementation.
|
63
|
[ 0.002122] smp: Bringing up secondary CPUs ...
|
64
|
[ 0.003473] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
|
65
|
[ 0.003476] CPU1: Spectre v2: using BPIALL workaround
|
66
|
[ 0.004868] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
|
67
|
[ 0.004870] CPU2: Spectre v2: using BPIALL workaround
|
68
|
[ 0.006243] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
|
69
|
[ 0.006246] CPU3: Spectre v2: using BPIALL workaround
|
70
|
[ 0.006291] smp: Brought up 1 node, 4 CPUs
|
71
|
[ 0.006295] SMP: Total of 4 processors activated (192.00 BogoMIPS).
|
72
|
[ 0.006297] CPU: All CPU(s) started in SVC mode.
|
73
|
[ 0.007014] devtmpfs: initialized
|
74
|
[ 0.011856] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
|
75
|
[ 0.011951] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
|
76
|
[ 0.011959] futex hash table entries: 1024 (order: 4, 65536 bytes)
|
77
|
[ 0.012376] pinctrl core: initialized pinctrl subsystem
|
78
|
[ 0.012888] NET: Registered protocol family 16
|
79
|
[ 0.013471] DMA: preallocated 256 KiB pool for atomic coherent allocations
|
80
|
[ 0.014136] cpuidle: using governor ladder
|
81
|
[ 0.014146] cpuidle: using governor menu
|
82
|
[ 0.014414] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
|
83
|
[ 0.014417] hw-breakpoint: maximum watchpoint size is 4 bytes.
|
84
|
[ 0.014479] Serial: AMBA PL011 UART driver
|
85
|
[ 0.019797] gpio gpiochip0: (gpio0): added GPIO chardev (254:0)
|
86
|
[ 0.019829] gpiochip_setup_dev: registered GPIOs 0 to 23 on device: gpiochip0 (gpio0)
|
87
|
[ 0.019885] gpio gpiochip1: (gpio1): added GPIO chardev (254:1)
|
88
|
[ 0.019914] gpiochip_setup_dev: registered GPIOs 24 to 55 on device: gpiochip1 (gpio1)
|
89
|
[ 0.019965] gpio gpiochip2: (gpio2): added GPIO chardev (254:2)
|
90
|
[ 0.019993] gpiochip_setup_dev: registered GPIOs 56 to 87 on device: gpiochip2 (gpio2)
|
91
|
[ 0.020042] gpio gpiochip3: (gpio3): added GPIO chardev (254:3)
|
92
|
[ 0.020072] gpiochip_setup_dev: registered GPIOs 88 to 119 on device: gpiochip3 (gpio3)
|
93
|
[ 0.020137] gpio gpiochip4: (gpio4): added GPIO chardev (254:4)
|
94
|
[ 0.020164] gpiochip_setup_dev: registered GPIOs 120 to 151 on device: gpiochip4 (gpio4)
|
95
|
[ 0.020221] gpio gpiochip5: (gpio5): added GPIO chardev (254:5)
|
96
|
[ 0.020247] gpiochip_setup_dev: registered GPIOs 152 to 183 on device: gpiochip5 (gpio5)
|
97
|
[ 0.020297] gpio gpiochip6: (gpio6): added GPIO chardev (254:6)
|
98
|
[ 0.020326] gpiochip_setup_dev: registered GPIOs 184 to 215 on device: gpiochip6 (gpio6)
|
99
|
[ 0.020377] gpio gpiochip7: (gpio7): added GPIO chardev (254:7)
|
100
|
[ 0.020404] gpiochip_setup_dev: registered GPIOs 216 to 247 on device: gpiochip7 (gpio7)
|
101
|
[ 0.020459] gpio gpiochip8: (gpio8): added GPIO chardev (254:8)
|
102
|
[ 0.020488] gpiochip_setup_dev: registered GPIOs 248 to 263 on device: gpiochip8 (gpio8)
|
103
|
[ 0.029770] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-5v[0]' - status (0)
|
104
|
[ 0.029918] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc33-sys[0]'
|
105
|
[ 0.030054] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc50-hdmi[0]' - status (0)
|
106
|
[ 0.030192] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vccsys[0]'
|
107
|
[ 0.030324] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5-host1-regulator[0]' - status (0)
|
108
|
[ 0.030396] vcc_5v: supplied by vccsys
|
109
|
[ 0.030421] vcc33_sys: supplied by vccsys
|
110
|
[ 0.030439] vcc50_hdmi: supplied by vcc_5v
|
111
|
[ 0.030524] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v-otg-regulator[0]' - status (0)
|
112
|
[ 0.030681] of_get_named_gpiod_flags: parsed 'gpio' property of node '/panel-regulator[0]' - status (0)
|
113
|
[ 0.030706] panel_regulator: supplied by vcc33_sys
|
114
|
[ 0.030845] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc18-lcd[0]' - status (0)
|
115
|
[ 0.030985] of_get_named_gpiod_flags: parsed 'gpio' property of node '/backlight-regulator[0]' - status (0)
|
116
|
[ 0.031007] backlight_regulator: supplied by vcc33_sys
|
117
|
[ 0.032888] SCSI subsystem initialized
|
118
|
[ 0.032974] usbcore: registered new interface driver usbfs
|
119
|
[ 0.032992] usbcore: registered new interface driver hub
|
120
|
[ 0.033029] usbcore: registered new device driver usb
|
121
|
[ 0.033176] pps_core: LinuxPPS API ver. 1 registered
|
122
|
[ 0.033178] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
|
123
|
[ 0.033187] PTP clock support registered
|
124
|
[ 0.033214] EDAC MC: Ver: 3.0.0
|
125
|
[ 0.033612] Bluetooth: Core ver 2.22
|
126
|
[ 0.033629] NET: Registered protocol family 31
|
127
|
[ 0.033631] Bluetooth: HCI device and connection manager initialized
|
128
|
[ 0.033636] Bluetooth: HCI socket layer initialized
|
129
|
[ 0.033639] Bluetooth: L2CAP socket layer initialized
|
130
|
[ 0.033651] Bluetooth: SCO socket layer initialized
|
131
|
[ 0.033899] clocksource: Switched to clocksource arch_sys_counter
|
132
|
[ 0.068222] VFS: Disk quotas dquot_6.6.0
|
133
|
[ 0.068260] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
|
134
|
[ 0.072300] NET: Registered protocol family 2
|
135
|
[ 0.072602] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
|
136
|
[ 0.072621] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
|
137
|
[ 0.072644] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
|
138
|
[ 0.072697] TCP: Hash tables configured (established 8192 bind 8192)
|
139
|
[ 0.072748] UDP hash table entries: 512 (order: 2, 16384 bytes)
|
140
|
[ 0.072764] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
|
141
|
[ 0.072852] NET: Registered protocol family 1
|
142
|
[ 0.073117] PCI: CLS 0 bytes, default 64
|
143
|
[ 0.073508] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
|
144
|
[ 0.074305] Initialise system trusted keyrings
|
145
|
[ 0.074324] Key type blacklist registered
|
146
|
[ 0.074400] workingset: timestamp_bits=14 max_order=20 bucket_order=6
|
147
|
[ 0.074490] zbud: loaded
|
148
|
[ 0.074806] squashfs: version 4.0 (2009/01/31) Phillip Lougher
|
149
|
[ 0.074841] ntfs: driver 2.1.32 [Flags: R/W].
|
150
|
[ 0.074861] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
|
151
|
[ 0.603571] cryptomgr_test (46) used greatest stack depth: 5684 bytes left
|
152
|
[ 1.914303] cryptomgr_test (47) used greatest stack depth: 5500 bytes left
|
153
|
[ 1.914952] cryptomgr_test (55) used greatest stack depth: 5228 bytes left
|
154
|
[ 1.922726] cryptomgr_test (104) used greatest stack depth: 5076 bytes left
|
155
|
[ 1.972283] Key type asymmetric registered
|
156
|
[ 1.972286] Asymmetric key parser 'x509' registered
|
157
|
[ 1.972314] bounce: pool size: 64 pages
|
158
|
[ 1.972344] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
|
159
|
[ 1.972412] io scheduler noop registered
|
160
|
[ 1.972414] io scheduler deadline registered
|
161
|
[ 1.972460] io scheduler cfq registered (default)
|
162
|
[ 1.972462] io scheduler mq-deadline registered
|
163
|
[ 1.972484] io scheduler bfq registered
|
164
|
[ 1.974578] pwm-backlight backlight: GPIO lookup for consumer enable
|
165
|
[ 1.974582] pwm-backlight backlight: using device tree for GPIO lookup
|
166
|
[ 1.974600] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/backlight[0]' - status (0)
|
167
|
[ 1.974614] gpio gpiochip7: Persistence not supported for GPIO 2
|
168
|
[ 1.974616] no flags found for enable
|
169
|
[ 1.974666] pwm-backlight backlight: Linked as a consumer to regulator.9
|
170
|
[ 1.975668] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
|
171
|
[ 1.975673] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
|
172
|
[ 1.975959] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
|
173
|
[ 1.975964] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
|
174
|
[ 1.978733] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
|
175
|
[ 1.979520] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 3000000) is a 16550A
|
176
|
[ 1.979838] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 39, base_baud = 1500000) is a 16550A
|
177
|
[ 1.980165] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 40, base_baud = 1500000) is a 16550A
|
178
|
[ 1.980589] Serial: AMBA driver
|
179
|
[ 1.983951] brd: module loaded
|
180
|
[ 1.987744] loop: module loaded
|
181
|
[ 1.987785] usbcore: registered new interface driver rtsx_usb
|
182
|
[ 1.989504] mdio_bus fixed-0: GPIO lookup for consumer reset
|
183
|
[ 1.989508] mdio_bus fixed-0: using lookup tables for GPIO lookup
|
184
|
[ 1.989512] mdio_bus fixed-0: No GPIO consumer reset found
|
185
|
[ 1.989524] libphy: Fixed MDIO Bus: probed
|
186
|
[ 1.989539] tun: Universal TUN/TAP device driver, 1.6
|
187
|
[ 1.989643] usbcore: registered new interface driver ath9k_htc
|
188
|
[ 1.989663] usbcore: registered new interface driver carl9170
|
189
|
[ 1.989680] usbcore: registered new interface driver rtl8150
|
190
|
[ 1.989700] usbcore: registered new interface driver r8152
|
191
|
[ 1.989713] usbcore: registered new interface driver lan78xx
|
192
|
[ 1.989730] usbcore: registered new interface driver asix
|
193
|
[ 1.989745] usbcore: registered new interface driver ax88179_178a
|
194
|
[ 1.989759] usbcore: registered new interface driver cdc_ether
|
195
|
[ 1.989772] usbcore: registered new interface driver cdc_eem
|
196
|
[ 1.989791] usbcore: registered new interface driver smsc75xx
|
197
|
[ 1.989809] usbcore: registered new interface driver smsc95xx
|
198
|
[ 1.989823] usbcore: registered new interface driver rndis_host
|
199
|
[ 1.989838] usbcore: registered new interface driver cdc_subset
|
200
|
[ 1.990037] dwc2 ff540000.usb: ff540000.usb supply vusb_d not found, using dummy regulator
|
201
|
[ 1.990071] dwc2 ff540000.usb: Linked as a consumer to regulator.0
|
202
|
[ 1.990078] dwc2 ff540000.usb: ff540000.usb supply vusb_a not found, using dummy regulator
|
203
|
[ 2.042064] dwc2 ff540000.usb: DWC OTG Controller
|
204
|
[ 2.042080] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
|
205
|
[ 2.042094] dwc2 ff540000.usb: irq 43, io mem 0xff540000
|
206
|
[ 2.042226] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
|
207
|
[ 2.042230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
208
|
[ 2.042233] usb usb1: Product: DWC OTG Controller
|
209
|
[ 2.042236] usb usb1: Manufacturer: Linux 4.19.67-gnu-2-veyron dwc2_hsotg
|
210
|
[ 2.042239] usb usb1: SerialNumber: ff540000.usb
|
211
|
[ 2.042474] hub 1-0:1.0: USB hub found
|
212
|
[ 2.042490] hub 1-0:1.0: 1 port detected
|
213
|
[ 2.042752] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
|
214
|
[ 2.042784] dwc2 ff580000.usb: Linked as a consumer to regulator.0
|
215
|
[ 2.042792] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
|
216
|
[ 2.052975] dwc2 ff580000.usb: DWC OTG Controller
|
217
|
[ 2.052987] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2
|
218
|
[ 2.052999] dwc2 ff580000.usb: irq 44, io mem 0xff580000
|
219
|
[ 2.053097] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
|
220
|
[ 2.053102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
221
|
[ 2.053104] usb usb2: Product: DWC OTG Controller
|
222
|
[ 2.053107] usb usb2: Manufacturer: Linux 4.19.67-gnu-2-veyron dwc2_hsotg
|
223
|
[ 2.053110] usb usb2: SerialNumber: ff580000.usb
|
224
|
[ 2.053305] hub 2-0:1.0: USB hub found
|
225
|
[ 2.053320] hub 2-0:1.0: 1 port detected
|
226
|
[ 2.053854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
227
|
[ 2.053856] ehci-pci: EHCI PCI platform driver
|
228
|
[ 2.053930] usbcore: registered new interface driver usb-storage
|
229
|
[ 2.054035] mousedev: PS/2 mouse device common for all mice
|
230
|
[ 2.055585] tpm_i2c_infineon 1-0020: 1.2 TPM (device-id 0x1A)
|
231
|
[ 2.118303] random: fast init done
|
232
|
[ 2.143172] rk808 0-001b: chip id: 0x0
|
233
|
[ 2.145693] rk808 0-001b: GPIO lookup for consumer dvs
|
234
|
[ 2.145697] rk808 0-001b: using device tree for GPIO lookup
|
235
|
[ 2.145706] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff650000/pmic@1b[0]'
|
236
|
[ 2.145712] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff650000/pmic@1b[0]'
|
237
|
[ 2.145716] rk808 0-001b: using lookup tables for GPIO lookup
|
238
|
[ 2.145719] rk808 0-001b: No GPIO consumer dvs found
|
239
|
[ 2.145723] rk808-regulator rk808-regulator: there is no dvs0 gpio
|
240
|
[ 2.145725] rk808 0-001b: GPIO lookup for consumer dvs
|
241
|
[ 2.145728] rk808 0-001b: using device tree for GPIO lookup
|
242
|
[ 2.145734] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff650000/pmic@1b[1]'
|
243
|
[ 2.145739] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff650000/pmic@1b[1]'
|
244
|
[ 2.145742] rk808 0-001b: using lookup tables for GPIO lookup
|
245
|
[ 2.145745] rk808 0-001b: No GPIO consumer dvs found
|
246
|
[ 2.145747] rk808-regulator rk808-regulator: there is no dvs1 gpio
|
247
|
[ 2.145772] DCDC_REG1: supplied by vcc33_sys
|
248
|
[ 2.146432] DCDC_REG2: supplied by vcc33_sys
|
249
|
[ 2.146968] DCDC_REG3: supplied by vcc33_sys
|
250
|
[ 2.147062] DCDC_REG4: supplied by vcc33_sys
|
251
|
[ 2.147406] LDO_REG1: supplied by vcc_5v
|
252
|
[ 2.148579] LDO_REG2: supplied by vcc_5v
|
253
|
[ 2.148797] LDO_REG3: supplied by vcc33_sys
|
254
|
[ 2.149737] LDO_REG4: supplied by vcc_5v
|
255
|
[ 2.150055] LDO_REG5: supplied by vcc_5v
|
256
|
[ 2.150370] LDO_REG6: supplied by vcc33_sys
|
257
|
[ 2.151186] LDO_REG7: supplied by vcc33_sys
|
258
|
[ 2.152013] LDO_REG8: supplied by vcc_5v
|
259
|
[ 2.152158] vcc33_ccd: Bringing 1800000uV into 3300000-3300000uV
|
260
|
[ 2.153132] SWITCH_REG1: supplied by vcc33_sys
|
261
|
[ 2.153322] SWITCH_REG2: supplied by vcc_18
|
262
|
[ 2.155653] rk808-rtc rk808-rtc: registered as rtc0
|
263
|
[ 2.156366] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.22
|
264
|
[ 2.156396] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.13
|
265
|
[ 2.156482] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.14
|
266
|
[ 2.156510] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.19
|
267
|
[ 2.156541] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.17
|
268
|
[ 2.156885] restart-gpio gpio-restart: GPIO lookup for consumer (null)
|
269
|
[ 2.156888] restart-gpio gpio-restart: using device tree for GPIO lookup
|
270
|
[ 2.156915] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-restart[0]' - status (0)
|
271
|
[ 2.156927] gpio gpiochip0: Persistence not supported for GPIO 13
|
272
|
[ 2.157312] gpio-charger gpio-charger: GPIO lookup for consumer (null)
|
273
|
[ 2.157315] gpio-charger gpio-charger: using device tree for GPIO lookup
|
274
|
[ 2.157325] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-charger[0]' - status (0)
|
275
|
[ 2.157332] gpio gpiochip0: Persistence not supported for GPIO 8
|
276
|
[ 2.157628] rockchip-thermal ff280000.tsadc: Missing rockchip,grf property
|
277
|
[ 2.158166] usbcore: registered new interface driver btusb
|
278
|
[ 2.158351] cpu cpu0: Linked as a consumer to regulator.10
|
279
|
[ 2.158377] cpu cpu0: Dropping the link to regulator.10
|
280
|
[ 2.158454] cpu cpu0: Linked as a consumer to regulator.10
|
281
|
[ 2.159333] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset
|
282
|
[ 2.159336] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup
|
283
|
[ 2.159351] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
|
284
|
[ 2.159363] gpio gpiochip4: Persistence not supported for GPIO 28
|
285
|
[ 2.159493] pwrseq_emmc emmc-pwrseq: GPIO lookup for consumer reset
|
286
|
[ 2.159496] pwrseq_emmc emmc-pwrseq: using device tree for GPIO lookup
|
287
|
[ 2.159508] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/emmc-pwrseq[0]' - status (0)
|
288
|
[ 2.159517] gpio gpiochip2: Persistence not supported for GPIO 9
|
289
|
[ 2.159590] sdhci: Secure Digital Host Controller Interface driver
|
290
|
[ 2.159592] sdhci: Copyright(c) Pierre Ossman
|
291
|
[ 2.159608] Synopsys Designware Multimedia Card Interface Driver
|
292
|
[ 2.160188] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
|
293
|
[ 2.160269] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
|
294
|
[ 2.160276] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
|
295
|
[ 2.160305] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
|
296
|
[ 2.160349] dwmmc_rockchip ff0c0000.dwmmc: Linked as a consumer to regulator.18
|
297
|
[ 2.160383] dwmmc_rockchip ff0c0000.dwmmc: Linked as a consumer to regulator.17
|
298
|
[ 2.160393] dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer cd
|
299
|
[ 2.160395] dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup
|
300
|
[ 2.160409] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/dwmmc@ff0c0000[0]' - status (0)
|
301
|
[ 2.160421] gpio gpiochip7: Persistence not supported for GPIO 5
|
302
|
[ 2.160433] dwmmc_rockchip ff0c0000.dwmmc: Got CD GPIO
|
303
|
[ 2.160436] dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer wp
|
304
|
[ 2.160439] dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup
|
305
|
[ 2.160446] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0c0000[0]'
|
306
|
[ 2.160452] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0c0000[0]'
|
307
|
[ 2.160455] dwmmc_rockchip ff0c0000.dwmmc: using lookup tables for GPIO lookup
|
308
|
[ 2.160458] dwmmc_rockchip ff0c0000.dwmmc: No GPIO consumer wp found
|
309
|
[ 2.173105] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
|
310
|
[ 2.186054] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
|
311
|
[ 2.186083] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
|
312
|
[ 2.186088] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
|
313
|
[ 2.186116] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
|
314
|
[ 2.186161] dwmmc_rockchip ff0d0000.dwmmc: Linked as a consumer to regulator.2
|
315
|
[ 2.186302] dwmmc_rockchip ff0d0000.dwmmc: Linked as a consumer to regulator.13
|
316
|
[ 2.186310] dwmmc_rockchip ff0d0000.dwmmc: GPIO lookup for consumer wp
|
317
|
[ 2.186313] dwmmc_rockchip ff0d0000.dwmmc: using device tree for GPIO lookup
|
318
|
[ 2.186321] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0d0000[0]'
|
319
|
[ 2.186327] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0d0000[0]'
|
320
|
[ 2.186330] dwmmc_rockchip ff0d0000.dwmmc: using lookup tables for GPIO lookup
|
321
|
[ 2.186333] dwmmc_rockchip ff0d0000.dwmmc: No GPIO consumer wp found
|
322
|
[ 2.186349] dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
|
323
|
[ 2.186352] mmc_host mmc1: card is non-removable.
|
324
|
[ 2.199187] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
|
325
|
[ 2.212048] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
|
326
|
[ 2.212075] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
|
327
|
[ 2.212080] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
|
328
|
[ 2.212100] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
|
329
|
[ 2.212130] dwmmc_rockchip ff0f0000.dwmmc: GPIO lookup for consumer wp
|
330
|
[ 2.212133] dwmmc_rockchip ff0f0000.dwmmc: using device tree for GPIO lookup
|
331
|
[ 2.212140] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0f0000[0]'
|
332
|
[ 2.212146] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0f0000[0]'
|
333
|
[ 2.212149] dwmmc_rockchip ff0f0000.dwmmc: using lookup tables for GPIO lookup
|
334
|
[ 2.212152] dwmmc_rockchip ff0f0000.dwmmc: No GPIO consumer wp found
|
335
|
[ 2.212166] dwmmc_rockchip ff0f0000.dwmmc: allocated mmc-pwrseq
|
336
|
[ 2.212169] mmc_host mmc2: card is non-removable.
|
337
|
[ 2.224769] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
|
338
|
[ 2.236284] usbcore: registered new interface driver ushc
|
339
|
[ 2.236323] sdhci-pltfm: SDHCI platform and OF driver helper
|
340
|
[ 2.236454] ledtrig-cpu: registered to indicate activity on CPUs
|
341
|
[ 2.242825] rk3288-crypto ff8a0000.cypto-controller: Crypto Accelerator successfully registered
|
342
|
[ 2.242938] hidraw: raw HID events driver (C) Jiri Kosina
|
343
|
[ 2.243026] usbcore: registered new interface driver usbhid
|
344
|
[ 2.243028] usbhid: USB HID core driver
|
345
|
[ 2.247440] cros-ec-dev cros-ec-dev.0.auto: cannot get EC features: 0/1
|
346
|
[ 2.255445] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
|
347
|
[ 2.256987] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
|
348
|
[ 2.258526] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
|
349
|
[ 2.261321] cros-ec-dev cros-ec-dev.0.auto: device does not support reading the console log
|
350
|
[ 2.261525] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
|
351
|
[ 2.261637] sbs-battery 20-000b: GPIO lookup for consumer sbs,battery-detect
|
352
|
[ 2.261640] sbs-battery 20-000b: using device tree for GPIO lookup
|
353
|
[ 2.261648] of_get_named_gpiod_flags: can't parse 'sbs,battery-detect-gpios' property of node '/spi@ff110000/ec@0/i2c-tunnel/sbs-battery@b[0]'
|
354
|
[ 2.261655] of_get_named_gpiod_flags: can't parse 'sbs,battery-detect-gpio' property of node '/spi@ff110000/ec@0/i2c-tunnel/sbs-battery@b[0]'
|
355
|
[ 2.261658] sbs-battery 20-000b: using lookup tables for GPIO lookup
|
356
|
[ 2.261662] sbs-battery 20-000b: No GPIO consumer sbs,battery-detect found
|
357
|
[ 2.263078] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered
|
358
|
[ 2.263314] input: cros_ec as /devices/platform/ff110000.spi/spi_master/spi0/spi0.0/ff110000.spi:ec@0:keyboard-controller/input/input0
|
359
|
[ 2.265665] cros-ec-spi spi0.0: Chrome EC device registered
|
360
|
[ 2.266793] NET: Registered protocol family 10
|
361
|
[ 2.267199] Segment Routing with IPv6
|
362
|
[ 2.267298] NET: Registered protocol family 17
|
363
|
[ 2.267305] NET: Registered protocol family 5
|
364
|
[ 2.267371] Bluetooth: RFCOMM socket layer initialized
|
365
|
[ 2.267386] Bluetooth: RFCOMM ver 1.11
|
366
|
[ 2.267392] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
|
367
|
[ 2.267394] Bluetooth: BNEP filters: protocol
|
368
|
[ 2.267398] Bluetooth: BNEP socket layer initialized
|
369
|
[ 2.267401] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
|
370
|
[ 2.267404] Bluetooth: HIDP socket layer initialized
|
371
|
[ 2.267473] ThumbEE CPU extension supported.
|
372
|
[ 2.267477] Registering SWP/SWPB emulation handler
|
373
|
[ 2.267734] registered taskstats version 1
|
374
|
[ 2.267737] Loading compiled-in X.509 certificates
|
375
|
[ 2.267778] zswap: loaded using pool lzo/zbud
|
376
|
[ 2.276871] elan_i2c 4-0015: Linked as a consumer to regulator.14
|
377
|
[ 2.277005] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/power[0]' - status (0)
|
378
|
[ 2.277019] gpio gpiochip0: Persistence not supported for GPIO 5
|
379
|
[ 2.277076] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/lid[0]' - status (0)
|
380
|
[ 2.277083] gpio gpiochip0: Persistence not supported for GPIO 6
|
381
|
[ 2.277188] input: gpio-keys as /devices/platform/gpio-keys/input/input1
|
382
|
[ 2.277504] cfg80211: Loading compiled-in X.509 certificates for regulatory database
|
383
|
[ 2.309842] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
|
384
|
[ 2.322510] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
|
385
|
[ 2.393688] elan_i2c 4-0015: Elan Touchpad: Module ID: 0x0061, Firmware: 0x0001, Sample: 0x0002, IAP: 0x0009
|
386
|
[ 2.393878] input: Elan Touchpad as /devices/platform/ff160000.i2c/i2c-4/4-0015/input/input2
|
387
|
[ 2.414911] usb 1-1: new full-speed USB device number 2 using dwc2
|
388
|
[ 2.429909] usb 2-1: new high-speed USB device number 2 using dwc2
|
389
|
[ 2.438942] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
|
390
|
[ 2.439201] vcc18_lcd: supplied by vcc_18
|
391
|
[ 2.439254] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
|
392
|
[ 2.439258] cfg80211: failed to load regulatory.db
|
393
|
[ 2.439314] panel_regulator: disabling
|
394
|
[ 2.439317] backlight_regulator: disabling
|
395
|
[ 2.439428] Waiting for root device PARTUUID=e0c9b70e-04be-2f48-bfa4-13fe5a2969c4/PARTNROFF=1...
|
396
|
[ 2.593387] usb 1-1: New USB device found, idVendor=0fe6, idProduct=9700, bcdDevice= 1.01
|
397
|
[ 2.593391] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
|
398
|
[ 2.593394] usb 1-1: Product: USB 2.0 10/100M Ethernet Adaptor
|
399
|
[ 2.609167] usb 2-1: New USB device found, idVendor=0781, idProduct=5571, bcdDevice= 1.26
|
400
|
[ 2.609172] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
|
401
|
[ 2.609174] usb 2-1: Product: Cruzer Fit
|
402
|
[ 2.609177] usb 2-1: Manufacturer: SanDisk
|
403
|
[ 2.609179] usb 2-1: SerialNumber: 4C532000070321123350
|
404
|
[ 2.609413] usb-storage 2-1:1.0: USB Mass Storage device detected
|
405
|
[ 2.609634] scsi host0: usb-storage 2-1:1.0
|
406
|
[ 2.655925] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 179
|
407
|
[ 2.658249] mmc2: new HS200 MMC card at address 0001
|
408
|
[ 2.659049] mmcblk2: mmc2:0001 HAG2e 14.7 GiB
|
409
|
[ 2.659845] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB
|
410
|
[ 2.660716] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB
|
411
|
[ 2.660856] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB, chardev (243:0)
|
412
|
[ 2.831931] dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to 201
|
413
|
[ 2.833267] mmc1: new ultra high speed SDR104 SDIO card at address 0001
|
414
|
[ 3.618026] scsi 0:0:0:0: Direct-Access SanDisk 1.26 PQ: 0 ANSI: 5
|
415
|
[ 3.625742] sd 0:0:0:0: [sda] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB)
|
416
|
[ 3.638858] sd 0:0:0:0: [sda] Write Protect is off
|
417
|
[ 3.638862] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
|
418
|
[ 3.639118] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
|
419
|
[ 3.662704] sda: sda1 sda2
|
420
|
[ 3.663700] sd 0:0:0:0: [sda] Attached SCSI removable disk
|
421
|
[ 3.678035] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
|
422
|
[ 3.678055] VFS: Mounted root (ext4 filesystem) on device 8:2.
|
423
|
[ 3.685888] devtmpfs: mounted
|
424
|
[ 3.687976] Freeing unused kernel memory: 1024K
|
425
|
[ 3.688049] Run /sbin/init as init process
|
426
|
[ 4.228350] systemd[1]: System time before build time, advancing clock.
|
427
|
[ 4.277117] systemd[1]: systemd 243.51-1.par1-parabola running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
|
428
|
[ 4.277517] systemd[1]: Detected architecture arm.
|
429
|
[ 4.289517] systemd[1]: Set hostname to <Technetium>.
|
430
|
[ 4.388510] random: crng init done
|
431
|
[ 4.469753] 10-arch (147) used greatest stack depth: 4892 bytes left
|
432
|
[ 4.934407] systemd[1]: Created slice system-getty.slice.
|
433
|
[ 4.935196] systemd[1]: Created slice User and Session Slice.
|
434
|
[ 4.935454] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
|
435
|
[ 4.935690] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
|
436
|
[ 4.936293] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
|
437
|
[ 4.936450] systemd[1]: Reached target Local Encrypted Volumes.
|
438
|
[ 4.936605] systemd[1]: Reached target Paths.
|
439
|
[ 5.001265] mount (162) used greatest stack depth: 4692 bytes left
|
440
|
[ 5.419811] udevadm (173) used greatest stack depth: 4524 bytes left
|
441
|
[ 5.497073] systemd-journald[177]: Received client request to flush runtime journal.
|
442
|
[ 5.505538] systemd-journald[177]: File /var/log/journal/46c5cf183ac448bab90e3f5012adc1b7/system.journal corrupted or uncleanly shut down, renaming and replacing.
|
443
|
[ 6.055429] ehci-platform: EHCI generic platform driver
|
444
|
[ 6.055657] ehci-platform ff500000.usb: EHCI Host Controller
|
445
|
[ 6.055836] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3
|
446
|
[ 6.056588] ehci-platform ff500000.usb: irq 42, io mem 0xff500000
|
447
|
[ 6.062919] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
|
448
|
[ 6.063022] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
|
449
|
[ 6.063026] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
450
|
[ 6.063029] usb usb3: Product: EHCI Host Controller
|
451
|
[ 6.063032] usb usb3: Manufacturer: Linux 4.19.67-gnu-2-veyron ehci_hcd
|
452
|
[ 6.063035] usb usb3: SerialNumber: ff500000.usb
|
453
|
[ 6.063310] hub 3-0:1.0: USB hub found
|
454
|
[ 6.063330] hub 3-0:1.0: 1 port detected
|
455
|
[ 6.385933] usb 3-1: new high-speed USB device number 2 using ehci-platform
|
456
|
[ 6.507765] usbcore: registered new interface driver uas
|
457
|
[ 6.521007] panel-simple panel: Linked as a consumer to regulator.7
|
458
|
[ 6.521014] panel-simple panel: GPIO lookup for consumer enable
|
459
|
[ 6.521017] panel-simple panel: using device tree for GPIO lookup
|
460
|
[ 6.521027] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/panel[0]'
|
461
|
[ 6.521033] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/panel[0]'
|
462
|
[ 6.521037] panel-simple panel: using lookup tables for GPIO lookup
|
463
|
[ 6.521040] panel-simple panel: No GPIO consumer enable found
|
464
|
[ 6.577113] usb 3-1: New USB device found, idVendor=04f2, idProduct=b53a, bcdDevice=32.01
|
465
|
[ 6.577120] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
|
466
|
[ 6.577123] usb 3-1: Product: USB2.0 HD UVC WebCam
|
467
|
[ 6.577126] usb 3-1: Manufacturer: Generic
|
468
|
[ 6.577128] usb 3-1: SerialNumber: 200901010001
|
469
|
[ 6.651956] rockchip-snd-max98090 sound: ASoC: CPU DAI (null) not registered
|
470
|
[ 6.651964] rockchip-snd-max98090 sound: Soc register card failed -517
|
471
|
[ 6.684380] max98090 2-0010: MAX98090 REVID=0x43
|
472
|
[ 6.686219] max98090 2-0010: use default 2.8v micbias
|
473
|
[ 6.688848] rockchip-snd-max98090 sound: HiFi <-> ff890000.i2s mapping ok
|
474
|
[ 6.689932] input: VEYRON-I2S Headset Jack as /devices/platform/sound/sound/card0/input3
|
475
|
[ 6.888886] iommu: Adding device ff930000.vop to group 0
|
476
|
[ 6.889128] rockchip-vop ff930000.vop: Linked as a consumer to ff930300.iommu
|
477
|
[ 6.889274] iommu: Adding device ff940000.vop to group 1
|
478
|
[ 6.889299] rockchip-vop ff940000.vop: Linked as a consumer to ff940300.iommu
|
479
|
[ 6.890178] rockchip-drm display-subsystem: Linked as a consumer to ff930000.vop
|
480
|
[ 6.890191] rockchip-drm display-subsystem: Linked as a consumer to ff940000.vop
|
481
|
[ 6.890313] rockchip-drm display-subsystem: Linked as a consumer to ff970000.dp
|
482
|
[ 6.891868] rockchip-drm display-subsystem: Linked as a consumer to ff980000.hdmi
|
483
|
[ 6.892515] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm])
|
484
|
[ 6.892828] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm])
|
485
|
[ 6.892883] of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/dp@ff970000[0]'
|
486
|
[ 6.892890] of_get_named_gpiod_flags: can't parse 'samsung,hpd-gpio' property of node '/dp@ff970000[0]'
|
487
|
[ 6.893149] rockchip-drm display-subsystem: bound ff970000.dp (ops rockchip_dp_component_ops [rockchipdrm])
|
488
|
[ 6.893258] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY)
|
489
|
[ 6.893607] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
|
490
|
[ 6.893612] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
|
491
|
[ 6.893614] [drm] No driver support for vblank timestamp query.
|
492
|
[ 7.117472] rockchip-dp ff970000.dp: Link Training Clock Recovery success
|
493
|
[ 7.122705] rockchip-dp ff970000.dp: Link Training success!
|
494
|
[ 7.224559] Console: switching to colour frame buffer device 170x48
|
495
|
[ 7.247599] rockchip-drm display-subsystem: fb0: frame buffer device
|
496
|
[ 7.253238] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
|
497
|
[ 12.292347] systemd-udevd (180) used greatest stack depth: 3532 bytes left
|
498
|
[ 28.501135] systemd-journald[177]: File /var/log/journal/46c5cf183ac448bab90e3f5012adc1b7/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
|
499
|
[ 40.711956] usb 1-1: USB disconnect, device number 2
|