[ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 4.19.67-gnu-2-veyron (builduser@andi) (gcc version 8.3.0 (GCC)) #2 SMP Mon Oct 14 16:07:28 CEST 2019 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Google Speedy [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xfd000000 [ 0.000000] On node 0 totalpages: 1044224 [ 0.000000] Normal zone: 2304 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 262144 pages, LIFO batch:63 [ 0.000000] HighMem zone: 782080 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0x88/0x4e8 with crng_init=0 [ 0.000000] percpu: Embedded 18 pages/cpu s42508 r8192 d23028 u73728 [ 0.000000] pcpu-alloc: s42508 r8192 d23028 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1041920 [ 0.000000] Kernel command line: cros_secure console=tty0 init=/sbin/init root=PARTUUID=e0c9b70e-04be-2f48-bfa4-13fe5a2969c4/PARTNROFF=1 rootwait rw noinitrd [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 4180992 bytes of page_ext [ 0.000000] Memory: 4087708K/4176896K available (9216K kernel code, 710K rwdata, 2204K rodata, 1024K init, 276K bss, 72804K reserved, 16384K cma-reserved, 3096576K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xb0000000 - 0xf0000000 (1024 MB) pkmap : 0xafe00000 - 0xb0000000 ( 2 MB) modules : 0xaf000000 - 0xafe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (10208 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 711 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 277 kB) [ 0.000000] ftrace: allocating 32585 entries in 96 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000007] Switching to timer-based delay loop, resolution 41ns [ 0.000690] Console: colour dummy device 80x30 [ 0.000733] console [tty0] enabled [ 0.000753] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) [ 0.000758] pid_max: default: 32768 minimum: 301 [ 0.000860] Security Framework initialized [ 0.000893] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000898] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001301] CPU: Testing write buffer coherency: ok [ 0.001317] CPU0: Spectre v2: using BPIALL workaround [ 0.001458] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 [ 0.001788] Setting up static identity map for 0x100000 - 0x100060 [ 0.001839] rcu: Hierarchical SRCU implementation. [ 0.002122] smp: Bringing up secondary CPUs ... [ 0.003473] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 [ 0.003476] CPU1: Spectre v2: using BPIALL workaround [ 0.004868] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 [ 0.004870] CPU2: Spectre v2: using BPIALL workaround [ 0.006243] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 [ 0.006246] CPU3: Spectre v2: using BPIALL workaround [ 0.006291] smp: Brought up 1 node, 4 CPUs [ 0.006295] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.006297] CPU: All CPU(s) started in SVC mode. [ 0.007014] devtmpfs: initialized [ 0.011856] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 [ 0.011951] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.011959] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.012376] pinctrl core: initialized pinctrl subsystem [ 0.012888] NET: Registered protocol family 16 [ 0.013471] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.014136] cpuidle: using governor ladder [ 0.014146] cpuidle: using governor menu [ 0.014414] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.014417] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.014479] Serial: AMBA PL011 UART driver [ 0.019797] gpio gpiochip0: (gpio0): added GPIO chardev (254:0) [ 0.019829] gpiochip_setup_dev: registered GPIOs 0 to 23 on device: gpiochip0 (gpio0) [ 0.019885] gpio gpiochip1: (gpio1): added GPIO chardev (254:1) [ 0.019914] gpiochip_setup_dev: registered GPIOs 24 to 55 on device: gpiochip1 (gpio1) [ 0.019965] gpio gpiochip2: (gpio2): added GPIO chardev (254:2) [ 0.019993] gpiochip_setup_dev: registered GPIOs 56 to 87 on device: gpiochip2 (gpio2) [ 0.020042] gpio gpiochip3: (gpio3): added GPIO chardev (254:3) [ 0.020072] gpiochip_setup_dev: registered GPIOs 88 to 119 on device: gpiochip3 (gpio3) [ 0.020137] gpio gpiochip4: (gpio4): added GPIO chardev (254:4) [ 0.020164] gpiochip_setup_dev: registered GPIOs 120 to 151 on device: gpiochip4 (gpio4) [ 0.020221] gpio gpiochip5: (gpio5): added GPIO chardev (254:5) [ 0.020247] gpiochip_setup_dev: registered GPIOs 152 to 183 on device: gpiochip5 (gpio5) [ 0.020297] gpio gpiochip6: (gpio6): added GPIO chardev (254:6) [ 0.020326] gpiochip_setup_dev: registered GPIOs 184 to 215 on device: gpiochip6 (gpio6) [ 0.020377] gpio gpiochip7: (gpio7): added GPIO chardev (254:7) [ 0.020404] gpiochip_setup_dev: registered GPIOs 216 to 247 on device: gpiochip7 (gpio7) [ 0.020459] gpio gpiochip8: (gpio8): added GPIO chardev (254:8) [ 0.020488] gpiochip_setup_dev: registered GPIOs 248 to 263 on device: gpiochip8 (gpio8) [ 0.029770] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-5v[0]' - status (0) [ 0.029918] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc33-sys[0]' [ 0.030054] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc50-hdmi[0]' - status (0) [ 0.030192] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vccsys[0]' [ 0.030324] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5-host1-regulator[0]' - status (0) [ 0.030396] vcc_5v: supplied by vccsys [ 0.030421] vcc33_sys: supplied by vccsys [ 0.030439] vcc50_hdmi: supplied by vcc_5v [ 0.030524] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v-otg-regulator[0]' - status (0) [ 0.030681] of_get_named_gpiod_flags: parsed 'gpio' property of node '/panel-regulator[0]' - status (0) [ 0.030706] panel_regulator: supplied by vcc33_sys [ 0.030845] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc18-lcd[0]' - status (0) [ 0.030985] of_get_named_gpiod_flags: parsed 'gpio' property of node '/backlight-regulator[0]' - status (0) [ 0.031007] backlight_regulator: supplied by vcc33_sys [ 0.032888] SCSI subsystem initialized [ 0.032974] usbcore: registered new interface driver usbfs [ 0.032992] usbcore: registered new interface driver hub [ 0.033029] usbcore: registered new device driver usb [ 0.033176] pps_core: LinuxPPS API ver. 1 registered [ 0.033178] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.033187] PTP clock support registered [ 0.033214] EDAC MC: Ver: 3.0.0 [ 0.033612] Bluetooth: Core ver 2.22 [ 0.033629] NET: Registered protocol family 31 [ 0.033631] Bluetooth: HCI device and connection manager initialized [ 0.033636] Bluetooth: HCI socket layer initialized [ 0.033639] Bluetooth: L2CAP socket layer initialized [ 0.033651] Bluetooth: SCO socket layer initialized [ 0.033899] clocksource: Switched to clocksource arch_sys_counter [ 0.068222] VFS: Disk quotas dquot_6.6.0 [ 0.068260] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.072300] NET: Registered protocol family 2 [ 0.072602] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.072621] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.072644] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.072697] TCP: Hash tables configured (established 8192 bind 8192) [ 0.072748] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.072764] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.072852] NET: Registered protocol family 1 [ 0.073117] PCI: CLS 0 bytes, default 64 [ 0.073508] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available [ 0.074305] Initialise system trusted keyrings [ 0.074324] Key type blacklist registered [ 0.074400] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.074490] zbud: loaded [ 0.074806] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.074841] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.074861] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.603571] cryptomgr_test (46) used greatest stack depth: 5684 bytes left [ 1.914303] cryptomgr_test (47) used greatest stack depth: 5500 bytes left [ 1.914952] cryptomgr_test (55) used greatest stack depth: 5228 bytes left [ 1.922726] cryptomgr_test (104) used greatest stack depth: 5076 bytes left [ 1.972283] Key type asymmetric registered [ 1.972286] Asymmetric key parser 'x509' registered [ 1.972314] bounce: pool size: 64 pages [ 1.972344] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.972412] io scheduler noop registered [ 1.972414] io scheduler deadline registered [ 1.972460] io scheduler cfq registered (default) [ 1.972462] io scheduler mq-deadline registered [ 1.972484] io scheduler bfq registered [ 1.974578] pwm-backlight backlight: GPIO lookup for consumer enable [ 1.974582] pwm-backlight backlight: using device tree for GPIO lookup [ 1.974600] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/backlight[0]' - status (0) [ 1.974614] gpio gpiochip7: Persistence not supported for GPIO 2 [ 1.974616] no flags found for enable [ 1.974666] pwm-backlight backlight: Linked as a consumer to regulator.9 [ 1.975668] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.975673] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 1.975959] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.975964] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 [ 1.978733] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.979520] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 3000000) is a 16550A [ 1.979838] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 39, base_baud = 1500000) is a 16550A [ 1.980165] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 40, base_baud = 1500000) is a 16550A [ 1.980589] Serial: AMBA driver [ 1.983951] brd: module loaded [ 1.987744] loop: module loaded [ 1.987785] usbcore: registered new interface driver rtsx_usb [ 1.989504] mdio_bus fixed-0: GPIO lookup for consumer reset [ 1.989508] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 1.989512] mdio_bus fixed-0: No GPIO consumer reset found [ 1.989524] libphy: Fixed MDIO Bus: probed [ 1.989539] tun: Universal TUN/TAP device driver, 1.6 [ 1.989643] usbcore: registered new interface driver ath9k_htc [ 1.989663] usbcore: registered new interface driver carl9170 [ 1.989680] usbcore: registered new interface driver rtl8150 [ 1.989700] usbcore: registered new interface driver r8152 [ 1.989713] usbcore: registered new interface driver lan78xx [ 1.989730] usbcore: registered new interface driver asix [ 1.989745] usbcore: registered new interface driver ax88179_178a [ 1.989759] usbcore: registered new interface driver cdc_ether [ 1.989772] usbcore: registered new interface driver cdc_eem [ 1.989791] usbcore: registered new interface driver smsc75xx [ 1.989809] usbcore: registered new interface driver smsc95xx [ 1.989823] usbcore: registered new interface driver rndis_host [ 1.989838] usbcore: registered new interface driver cdc_subset [ 1.990037] dwc2 ff540000.usb: ff540000.usb supply vusb_d not found, using dummy regulator [ 1.990071] dwc2 ff540000.usb: Linked as a consumer to regulator.0 [ 1.990078] dwc2 ff540000.usb: ff540000.usb supply vusb_a not found, using dummy regulator [ 2.042064] dwc2 ff540000.usb: DWC OTG Controller [ 2.042080] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 [ 2.042094] dwc2 ff540000.usb: irq 43, io mem 0xff540000 [ 2.042226] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.042230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.042233] usb usb1: Product: DWC OTG Controller [ 2.042236] usb usb1: Manufacturer: Linux 4.19.67-gnu-2-veyron dwc2_hsotg [ 2.042239] usb usb1: SerialNumber: ff540000.usb [ 2.042474] hub 1-0:1.0: USB hub found [ 2.042490] hub 1-0:1.0: 1 port detected [ 2.042752] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator [ 2.042784] dwc2 ff580000.usb: Linked as a consumer to regulator.0 [ 2.042792] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator [ 2.052975] dwc2 ff580000.usb: DWC OTG Controller [ 2.052987] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 [ 2.052999] dwc2 ff580000.usb: irq 44, io mem 0xff580000 [ 2.053097] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.053102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.053104] usb usb2: Product: DWC OTG Controller [ 2.053107] usb usb2: Manufacturer: Linux 4.19.67-gnu-2-veyron dwc2_hsotg [ 2.053110] usb usb2: SerialNumber: ff580000.usb [ 2.053305] hub 2-0:1.0: USB hub found [ 2.053320] hub 2-0:1.0: 1 port detected [ 2.053854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.053856] ehci-pci: EHCI PCI platform driver [ 2.053930] usbcore: registered new interface driver usb-storage [ 2.054035] mousedev: PS/2 mouse device common for all mice [ 2.055585] tpm_i2c_infineon 1-0020: 1.2 TPM (device-id 0x1A) [ 2.118303] random: fast init done [ 2.143172] rk808 0-001b: chip id: 0x0 [ 2.145693] rk808 0-001b: GPIO lookup for consumer dvs [ 2.145697] rk808 0-001b: using device tree for GPIO lookup [ 2.145706] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff650000/pmic@1b[0]' [ 2.145712] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff650000/pmic@1b[0]' [ 2.145716] rk808 0-001b: using lookup tables for GPIO lookup [ 2.145719] rk808 0-001b: No GPIO consumer dvs found [ 2.145723] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 2.145725] rk808 0-001b: GPIO lookup for consumer dvs [ 2.145728] rk808 0-001b: using device tree for GPIO lookup [ 2.145734] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff650000/pmic@1b[1]' [ 2.145739] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff650000/pmic@1b[1]' [ 2.145742] rk808 0-001b: using lookup tables for GPIO lookup [ 2.145745] rk808 0-001b: No GPIO consumer dvs found [ 2.145747] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 2.145772] DCDC_REG1: supplied by vcc33_sys [ 2.146432] DCDC_REG2: supplied by vcc33_sys [ 2.146968] DCDC_REG3: supplied by vcc33_sys [ 2.147062] DCDC_REG4: supplied by vcc33_sys [ 2.147406] LDO_REG1: supplied by vcc_5v [ 2.148579] LDO_REG2: supplied by vcc_5v [ 2.148797] LDO_REG3: supplied by vcc33_sys [ 2.149737] LDO_REG4: supplied by vcc_5v [ 2.150055] LDO_REG5: supplied by vcc_5v [ 2.150370] LDO_REG6: supplied by vcc33_sys [ 2.151186] LDO_REG7: supplied by vcc33_sys [ 2.152013] LDO_REG8: supplied by vcc_5v [ 2.152158] vcc33_ccd: Bringing 1800000uV into 3300000-3300000uV [ 2.153132] SWITCH_REG1: supplied by vcc33_sys [ 2.153322] SWITCH_REG2: supplied by vcc_18 [ 2.155653] rk808-rtc rk808-rtc: registered as rtc0 [ 2.156366] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.22 [ 2.156396] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.13 [ 2.156482] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.14 [ 2.156510] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.19 [ 2.156541] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.17 [ 2.156885] restart-gpio gpio-restart: GPIO lookup for consumer (null) [ 2.156888] restart-gpio gpio-restart: using device tree for GPIO lookup [ 2.156915] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-restart[0]' - status (0) [ 2.156927] gpio gpiochip0: Persistence not supported for GPIO 13 [ 2.157312] gpio-charger gpio-charger: GPIO lookup for consumer (null) [ 2.157315] gpio-charger gpio-charger: using device tree for GPIO lookup [ 2.157325] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-charger[0]' - status (0) [ 2.157332] gpio gpiochip0: Persistence not supported for GPIO 8 [ 2.157628] rockchip-thermal ff280000.tsadc: Missing rockchip,grf property [ 2.158166] usbcore: registered new interface driver btusb [ 2.158351] cpu cpu0: Linked as a consumer to regulator.10 [ 2.158377] cpu cpu0: Dropping the link to regulator.10 [ 2.158454] cpu cpu0: Linked as a consumer to regulator.10 [ 2.159333] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset [ 2.159336] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup [ 2.159351] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0) [ 2.159363] gpio gpiochip4: Persistence not supported for GPIO 28 [ 2.159493] pwrseq_emmc emmc-pwrseq: GPIO lookup for consumer reset [ 2.159496] pwrseq_emmc emmc-pwrseq: using device tree for GPIO lookup [ 2.159508] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/emmc-pwrseq[0]' - status (0) [ 2.159517] gpio gpiochip2: Persistence not supported for GPIO 9 [ 2.159590] sdhci: Secure Digital Host Controller Interface driver [ 2.159592] sdhci: Copyright(c) Pierre Ossman [ 2.159608] Synopsys Designware Multimedia Card Interface Driver [ 2.160188] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode. [ 2.160269] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller. [ 2.160276] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a [ 2.160305] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo [ 2.160349] dwmmc_rockchip ff0c0000.dwmmc: Linked as a consumer to regulator.18 [ 2.160383] dwmmc_rockchip ff0c0000.dwmmc: Linked as a consumer to regulator.17 [ 2.160393] dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer cd [ 2.160395] dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup [ 2.160409] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/dwmmc@ff0c0000[0]' - status (0) [ 2.160421] gpio gpiochip7: Persistence not supported for GPIO 5 [ 2.160433] dwmmc_rockchip ff0c0000.dwmmc: Got CD GPIO [ 2.160436] dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer wp [ 2.160439] dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup [ 2.160446] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0c0000[0]' [ 2.160452] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0c0000[0]' [ 2.160455] dwmmc_rockchip ff0c0000.dwmmc: using lookup tables for GPIO lookup [ 2.160458] dwmmc_rockchip ff0c0000.dwmmc: No GPIO consumer wp found [ 2.173105] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 2.186054] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode. [ 2.186083] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller. [ 2.186088] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a [ 2.186116] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo [ 2.186161] dwmmc_rockchip ff0d0000.dwmmc: Linked as a consumer to regulator.2 [ 2.186302] dwmmc_rockchip ff0d0000.dwmmc: Linked as a consumer to regulator.13 [ 2.186310] dwmmc_rockchip ff0d0000.dwmmc: GPIO lookup for consumer wp [ 2.186313] dwmmc_rockchip ff0d0000.dwmmc: using device tree for GPIO lookup [ 2.186321] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0d0000[0]' [ 2.186327] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0d0000[0]' [ 2.186330] dwmmc_rockchip ff0d0000.dwmmc: using lookup tables for GPIO lookup [ 2.186333] dwmmc_rockchip ff0d0000.dwmmc: No GPIO consumer wp found [ 2.186349] dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq [ 2.186352] mmc_host mmc1: card is non-removable. [ 2.199187] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 2.212048] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode. [ 2.212075] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller. [ 2.212080] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a [ 2.212100] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo [ 2.212130] dwmmc_rockchip ff0f0000.dwmmc: GPIO lookup for consumer wp [ 2.212133] dwmmc_rockchip ff0f0000.dwmmc: using device tree for GPIO lookup [ 2.212140] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0f0000[0]' [ 2.212146] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0f0000[0]' [ 2.212149] dwmmc_rockchip ff0f0000.dwmmc: using lookup tables for GPIO lookup [ 2.212152] dwmmc_rockchip ff0f0000.dwmmc: No GPIO consumer wp found [ 2.212166] dwmmc_rockchip ff0f0000.dwmmc: allocated mmc-pwrseq [ 2.212169] mmc_host mmc2: card is non-removable. [ 2.224769] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 2.236284] usbcore: registered new interface driver ushc [ 2.236323] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.236454] ledtrig-cpu: registered to indicate activity on CPUs [ 2.242825] rk3288-crypto ff8a0000.cypto-controller: Crypto Accelerator successfully registered [ 2.242938] hidraw: raw HID events driver (C) Jiri Kosina [ 2.243026] usbcore: registered new interface driver usbhid [ 2.243028] usbhid: USB HID core driver [ 2.247440] cros-ec-dev cros-ec-dev.0.auto: cannot get EC features: 0/1 [ 2.255445] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.256987] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.258526] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.261321] cros-ec-dev cros-ec-dev.0.auto: device does not support reading the console log [ 2.261525] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.261637] sbs-battery 20-000b: GPIO lookup for consumer sbs,battery-detect [ 2.261640] sbs-battery 20-000b: using device tree for GPIO lookup [ 2.261648] of_get_named_gpiod_flags: can't parse 'sbs,battery-detect-gpios' property of node '/spi@ff110000/ec@0/i2c-tunnel/sbs-battery@b[0]' [ 2.261655] of_get_named_gpiod_flags: can't parse 'sbs,battery-detect-gpio' property of node '/spi@ff110000/ec@0/i2c-tunnel/sbs-battery@b[0]' [ 2.261658] sbs-battery 20-000b: using lookup tables for GPIO lookup [ 2.261662] sbs-battery 20-000b: No GPIO consumer sbs,battery-detect found [ 2.263078] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered [ 2.263314] input: cros_ec as /devices/platform/ff110000.spi/spi_master/spi0/spi0.0/ff110000.spi:ec@0:keyboard-controller/input/input0 [ 2.265665] cros-ec-spi spi0.0: Chrome EC device registered [ 2.266793] NET: Registered protocol family 10 [ 2.267199] Segment Routing with IPv6 [ 2.267298] NET: Registered protocol family 17 [ 2.267305] NET: Registered protocol family 5 [ 2.267371] Bluetooth: RFCOMM socket layer initialized [ 2.267386] Bluetooth: RFCOMM ver 1.11 [ 2.267392] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.267394] Bluetooth: BNEP filters: protocol [ 2.267398] Bluetooth: BNEP socket layer initialized [ 2.267401] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.267404] Bluetooth: HIDP socket layer initialized [ 2.267473] ThumbEE CPU extension supported. [ 2.267477] Registering SWP/SWPB emulation handler [ 2.267734] registered taskstats version 1 [ 2.267737] Loading compiled-in X.509 certificates [ 2.267778] zswap: loaded using pool lzo/zbud [ 2.276871] elan_i2c 4-0015: Linked as a consumer to regulator.14 [ 2.277005] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/power[0]' - status (0) [ 2.277019] gpio gpiochip0: Persistence not supported for GPIO 5 [ 2.277076] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/lid[0]' - status (0) [ 2.277083] gpio gpiochip0: Persistence not supported for GPIO 6 [ 2.277188] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 2.277504] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.309842] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) [ 2.322510] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) [ 2.393688] elan_i2c 4-0015: Elan Touchpad: Module ID: 0x0061, Firmware: 0x0001, Sample: 0x0002, IAP: 0x0009 [ 2.393878] input: Elan Touchpad as /devices/platform/ff160000.i2c/i2c-4/4-0015/input/input2 [ 2.414911] usb 1-1: new full-speed USB device number 2 using dwc2 [ 2.429909] usb 2-1: new high-speed USB device number 2 using dwc2 [ 2.438942] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.439201] vcc18_lcd: supplied by vcc_18 [ 2.439254] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.439258] cfg80211: failed to load regulatory.db [ 2.439314] panel_regulator: disabling [ 2.439317] backlight_regulator: disabling [ 2.439428] Waiting for root device PARTUUID=e0c9b70e-04be-2f48-bfa4-13fe5a2969c4/PARTNROFF=1... [ 2.593387] usb 1-1: New USB device found, idVendor=0fe6, idProduct=9700, bcdDevice= 1.01 [ 2.593391] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.593394] usb 1-1: Product: USB 2.0 10/100M Ethernet Adaptor [ 2.609167] usb 2-1: New USB device found, idVendor=0781, idProduct=5571, bcdDevice= 1.26 [ 2.609172] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.609174] usb 2-1: Product: Cruzer Fit [ 2.609177] usb 2-1: Manufacturer: SanDisk [ 2.609179] usb 2-1: SerialNumber: 4C532000070321123350 [ 2.609413] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.609634] scsi host0: usb-storage 2-1:1.0 [ 2.655925] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 179 [ 2.658249] mmc2: new HS200 MMC card at address 0001 [ 2.659049] mmcblk2: mmc2:0001 HAG2e 14.7 GiB [ 2.659845] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB [ 2.660716] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB [ 2.660856] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB, chardev (243:0) [ 2.831931] dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to 201 [ 2.833267] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 3.618026] scsi 0:0:0:0: Direct-Access SanDisk 1.26 PQ: 0 ANSI: 5 [ 3.625742] sd 0:0:0:0: [sda] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 3.638858] sd 0:0:0:0: [sda] Write Protect is off [ 3.638862] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 3.639118] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.662704] sda: sda1 sda2 [ 3.663700] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.678035] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.678055] VFS: Mounted root (ext4 filesystem) on device 8:2. [ 3.685888] devtmpfs: mounted [ 3.687976] Freeing unused kernel memory: 1024K [ 3.688049] Run /sbin/init as init process [ 4.228350] systemd[1]: System time before build time, advancing clock. [ 4.277117] systemd[1]: systemd 243.51-1.par1-parabola running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 4.277517] systemd[1]: Detected architecture arm. [ 4.289517] systemd[1]: Set hostname to . [ 4.388510] random: crng init done [ 4.469753] 10-arch (147) used greatest stack depth: 4892 bytes left [ 4.934407] systemd[1]: Created slice system-getty.slice. [ 4.935196] systemd[1]: Created slice User and Session Slice. [ 4.935454] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.935690] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.936293] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.936450] systemd[1]: Reached target Local Encrypted Volumes. [ 4.936605] systemd[1]: Reached target Paths. [ 5.001265] mount (162) used greatest stack depth: 4692 bytes left [ 5.419811] udevadm (173) used greatest stack depth: 4524 bytes left [ 5.497073] systemd-journald[177]: Received client request to flush runtime journal. [ 5.505538] systemd-journald[177]: File /var/log/journal/46c5cf183ac448bab90e3f5012adc1b7/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 6.055429] ehci-platform: EHCI generic platform driver [ 6.055657] ehci-platform ff500000.usb: EHCI Host Controller [ 6.055836] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 [ 6.056588] ehci-platform ff500000.usb: irq 42, io mem 0xff500000 [ 6.062919] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 [ 6.063022] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 6.063026] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.063029] usb usb3: Product: EHCI Host Controller [ 6.063032] usb usb3: Manufacturer: Linux 4.19.67-gnu-2-veyron ehci_hcd [ 6.063035] usb usb3: SerialNumber: ff500000.usb [ 6.063310] hub 3-0:1.0: USB hub found [ 6.063330] hub 3-0:1.0: 1 port detected [ 6.385933] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 6.507765] usbcore: registered new interface driver uas [ 6.521007] panel-simple panel: Linked as a consumer to regulator.7 [ 6.521014] panel-simple panel: GPIO lookup for consumer enable [ 6.521017] panel-simple panel: using device tree for GPIO lookup [ 6.521027] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/panel[0]' [ 6.521033] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/panel[0]' [ 6.521037] panel-simple panel: using lookup tables for GPIO lookup [ 6.521040] panel-simple panel: No GPIO consumer enable found [ 6.577113] usb 3-1: New USB device found, idVendor=04f2, idProduct=b53a, bcdDevice=32.01 [ 6.577120] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 6.577123] usb 3-1: Product: USB2.0 HD UVC WebCam [ 6.577126] usb 3-1: Manufacturer: Generic [ 6.577128] usb 3-1: SerialNumber: 200901010001 [ 6.651956] rockchip-snd-max98090 sound: ASoC: CPU DAI (null) not registered [ 6.651964] rockchip-snd-max98090 sound: Soc register card failed -517 [ 6.684380] max98090 2-0010: MAX98090 REVID=0x43 [ 6.686219] max98090 2-0010: use default 2.8v micbias [ 6.688848] rockchip-snd-max98090 sound: HiFi <-> ff890000.i2s mapping ok [ 6.689932] input: VEYRON-I2S Headset Jack as /devices/platform/sound/sound/card0/input3 [ 6.888886] iommu: Adding device ff930000.vop to group 0 [ 6.889128] rockchip-vop ff930000.vop: Linked as a consumer to ff930300.iommu [ 6.889274] iommu: Adding device ff940000.vop to group 1 [ 6.889299] rockchip-vop ff940000.vop: Linked as a consumer to ff940300.iommu [ 6.890178] rockchip-drm display-subsystem: Linked as a consumer to ff930000.vop [ 6.890191] rockchip-drm display-subsystem: Linked as a consumer to ff940000.vop [ 6.890313] rockchip-drm display-subsystem: Linked as a consumer to ff970000.dp [ 6.891868] rockchip-drm display-subsystem: Linked as a consumer to ff980000.hdmi [ 6.892515] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) [ 6.892828] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) [ 6.892883] of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/dp@ff970000[0]' [ 6.892890] of_get_named_gpiod_flags: can't parse 'samsung,hpd-gpio' property of node '/dp@ff970000[0]' [ 6.893149] rockchip-drm display-subsystem: bound ff970000.dp (ops rockchip_dp_component_ops [rockchipdrm]) [ 6.893258] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) [ 6.893607] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) [ 6.893612] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.893614] [drm] No driver support for vblank timestamp query. [ 7.117472] rockchip-dp ff970000.dp: Link Training Clock Recovery success [ 7.122705] rockchip-dp ff970000.dp: Link Training success! [ 7.224559] Console: switching to colour frame buffer device 170x48 [ 7.247599] rockchip-drm display-subsystem: fb0: frame buffer device [ 7.253238] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 [ 12.292347] systemd-udevd (180) used greatest stack depth: 3532 bytes left [ 28.501135] systemd-journald[177]: File /var/log/journal/46c5cf183ac448bab90e3f5012adc1b7/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. [ 40.711956] usb 1-1: USB disconnect, device number 2