Project

General

Profile

[SOLVED] AR9462 Bluetooth not working

Phosit - over 4 years ago -

I use an AR9462.
On Arch WiFi and Bluetooth work. After i migrated to Parabola the Bluetooth stops working. After i removed the your-freedom and your-prifacy and switched back to the arch-linux kernel it is still not working.

$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 138a:003f Validity Sensors, Inc. VFS495 Fingerprint Reader
Bus 001 Device 002: ID 04ca:300f Lite-On Technology Corp. Atheros AR3012 Bluetooth
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

$ lsusb -t
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 7: Dev 2, If 0, Class=Wireless, Driver=, 12M
    |__ Port 7: Dev 2, If 1, Class=Wireless, Driver=, 12M
    |__ Port 8: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 12M

Replies (5)

RE: AR9462 Bluetooth not working - bill-auger - over 4 years ago -

that device is not listed on h-node; so it may not have free firmware available - probably, linux-libre removed the firmware package you had installed before

RE: AR9462 Bluetooth not working - freemor - over 4 years ago -

it does indeed I did some digging it requires a blob for the bluetooth

RE: AR9462 Bluetooth not working - Phosit - over 4 years ago -

I Installed the Arch-Linux kernel and adjust the bootloader but it is still not working.

Do i have to build a costume kernel if i will use this device?

RE: AR9462 Bluetooth not working - bill-auger - over 4 years ago -

if it worked before, then you should not need to do anything
special - most likely, the firmware package for that device
conflicted with linux-libre and it was removed when you
installed linux-libre - installing the arch kernel would not
re-install everything that linux-libre removed

RE: AR9462 Bluetooth not working - Phosit - over 4 years ago -

I re-installed the the firmware this Way it works.

Thank you

    (1-5/5)