Housekeeping #2073
Housekeeping #2071: [STICKY][icu] and friends (armv7h)
[libre/icedove]: rebuild against new icu (armv7h)
100%
Description
needs rebuild against icu
NOTE: remember to rebuild 'nonprism/icedove', 'icedove-extension-enigmail' , and 'libre/icedove-l10n' if the version has changed - all of these are coupled to each specific version of icedove, to avoid breakage
History
Updated by freemor over 4 years ago
- % Done changed from 0 to 10
- Status changed from open to in progress
starting cross-compile
Updated by freemor over 4 years ago
- % Done changed from 10 to 80
Compiled.
Put it in:
https://freemor.homelinux.net/~freemor/shared_files/parabola_arm_testing/
If someone with ARM hardware can test it and let me know it works I'll stage and release it.
Updated by shakthimaan over 4 years ago
I tested the following two packages on an Asus C201PA running Parabola from USB and they ran fine!
- icecat-52.6.0_gnu1-5-armv7h.pkg.tar.xz
- icedove-1:52.7.0-4-armv7h.pkg.tar.xz
Updated by freemor over 4 years ago
- % Done changed from 80 to 100
- Status changed from in progress to fixed
Staged, Release didn't work. will look into why
Thanks shakthimaan
Updated by freemor over 4 years ago
- % Done changed from 90 to 100
- Status changed from in progress to fixed
Oddly enough Icedove wont release properly if you try releasing icecat a second time.... D'oh!
Released.
Updated by bill-auger almost 3 years ago
- Subject changed from [libre/icedove] needs rebuild against [icu 63.1] for armv7h to [libre/icedove]: rebuild against new[icu (armv7h)
Updated by bill-auger almost 3 years ago
- Subject changed from [libre/icedove]: rebuild against new[icu (armv7h) to [libre/icedove]: rebuild against new icu (armv7h)
Updated by bill-auger almost 3 years ago
- Status changed from confirmed to open
- Tracker changed from Bug to Housekeeping